Wide Pin Swag Pre-Glued WD Buggy Front Tire, White (2)

Like the name suggests, the Pin Swag tire combines the outer lugs of a JConcepts Swagger front tire with the dense arrangement of specialty pins. Now optimized as a 2wd front tire and available as pre-mounted with wide body carcass, the pins themselves are round and crisp to the top where they climax to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge giving steering control. The Swag is split down the center to give a little individual control to contort to surfaces. The wide carcass and large contact patch Pin Swag is pre-mounted on the popular #3347 front wheel and available in bright white or fluorescent yellow colors. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. An already low-profile carcass like the successful Fuzz Bites rolls through the turns and transitions well at high and low speeds. A unique feature on the Pin Swag and many of the JConcepts carpet | turf racing tires, is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue and the geometry gives many edges and ledges to adhere to. The super low-profile tires are pre-mounted with custom low-profile, scalloped inserts to help support the center of the tire. The Mono wheel, the standard width race winning design since 2013 is used as the base feature in this pre-mounted package. The combination fits the majority of all 2wd off-road buggy vehicles including Team Associated, Schumacher, XRAY, Yokomo, Serpent, and Mugen.