Rewards points with every purchase
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Machined Pinion Gear, 48P, 26T w/ 5mm Bore
robinson-racing
Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped......
MSRP:
$ 8.59
SAVINGS: 7%
ONLY
$ 7.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Machined Pinion Gear, 48P, 29T w/ 5mm Bore
robinson-racing
Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped......
ONLY
$ 8.59
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Absolute Hardened Pinion Gear, 32P, 19T
robinson-racing
Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to......
MSRP:
$ 5.49
SAVINGS: 9%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 5 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Absolute Hardened Pinion Gear, 32P, 11T
robinson-racing
Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to......
MSRP:
$ 5.49
SAVINGS: 9%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Super Hard Steel Pinion Gear, 48P, 27T w/ 3.17mm Bore
robinson-racing
Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included....
MSRP:
$ 5.49
SAVINGS: 9%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Super Hard Steel Pinion Gear, 48P, 21T w/ 3.17mm Bore
robinson-racing
Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included....
MSRP:
$ 5.49
SAVINGS: 9%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Mod1 Pinion Gear, 23T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion......
MSRP:
$ 13.95
SAVINGS: 14%
ONLY
$ 11.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Mod1 Pinion Gear, 22T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion......
MSRP:
$ 13.95
SAVINGS: 14%
ONLY
$ 11.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Mod1 Pinion Gear, 20T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel .8 Mod Pinion Gear, 19T w/5mm Bore
robinson-racing
Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel .8 Mod Pinion Gear, 17T w/5mm Bore
robinson-racing
Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Mod1 Pinion Gear, 11T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 4 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Super Hard Steel Pinion Gear, 48P, 20T w/ 3.17mm Bore
robinson-racing
Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included....
MSRP:
$ 5.49
SAVINGS: 9%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Super Hard Steel Pinion Gear, 48P, 17T w/ 3.17mm Bore
robinson-racing
Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included....
MSRP:
$ 5.49
SAVINGS: 9%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Pinion Gear, 32P, 17T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Blackened Steel 32 Pitch Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Super Hard Steel Pinion Gear, 48P, 24T w/ 3.17mm Bore
robinson-racing
Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included....
MSRP:
$ 5.49
SAVINGS: 9%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Steel Pinion Gear, 32P, 13T, 5mm Motor Shaft
axial
This is the Axial 32P 13T steel pinion gear that fits 5mm motor shafts....
MSRP:
$ 8.09
SAVINGS: 14%
ONLY
$ 6.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Steel Pinion Gear, 48P, 14T
axial
This is an optional Axial 48P 14T steel pinion gear....
MSRP:
$ 9.19
SAVINGS: 13%
ONLY
$ 7.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 3 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
12T Pinion Gears & Bearings
tekno
Two (2) 12T Differential Pinion Gears (Part # TKR8152) CNC Hardened Construction True Straight Cut for Maximum Efficiency Smooth and Quiet Operation Two (2) 5x11x4 Ball Bearings (Part # TKRBB05114 Partial) Two (2) 5x13x4 Ball Bearings (Part # TKRBB05134 Partial) Two (2) 5x7x0.2 Shims (Part # TKR1226 Partial) ...
MSRP:
$ 48.99
SAVINGS: 80%
ONLY
$ 9.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Micro 4R Red Connector Plug
deans
This is the Micro 4R Red Connector Plug by Deans. For Battery to Speed Control....
ONLY
$ 5.84
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
EZ-Start Wiring Harness & Control Box
traxxas
This is the EZ-Start Wiring Harness & Control Box for the Traxxas RevoEZ-Start Connector Wiring Harness (Part # 4579X)Complete Control Box - EZ Start (Part # 5280)...
ONLY
$ 20.00
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Front & Rear Bumpers, LED Lights & Harness
traxxas
This is the Front & Rear Bumpers, LED Lights & Harness for the Traxxas SummitFront Bumper & Mount w/Screws (Part # 5635)Chrome Lightbars - Front Bumper & Roof (Part # 5634)LED Front Light Harness (Part # 5689)LED Center Light Harness (Part # 5687)Rear Bumper & Mount w/Screws (Part # 5636)LED......
ONLY
$ 46.25
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Spur Gear, Slipper Clutch & Motor Plate
traxxas
This is the Spur Gear, Slipper Clutch & Motor Plate for the Traxxas Telluride 4x4Motor Mount (Part # 6860A)Cover Gear & Wire Holder (Part # 6877)Motor Plate (Part # 6890)Gear Clutch, Complete (High Stall) (Part # 6766)12T 48P Pinion Gear w/Set Screw (Part # 2428)...
ONLY
$ 33.50
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Waterproof Receiver Box & Antenna Tube
traxxas
This is the Waterproof Receiver Box & Antenna Tube for the Traxxas Skully 2WDWaterproof Receiver Box w/Screws & Foam Pad (Part # 3628)Antenna Tube (Part # 1726)...
ONLY
$ 13.00
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
RPM, Temp & Voltage Sensors
traxxas
This is the RPM, Temp & Voltage Sensors for the Traxxas RevoTraxxas RPM Sensor, Long 3x4mm BCS (2) (Part # 6520)Temperature & Voltage Sensor, Long (Part # 6521)...
ONLY
$ 24.00
ORDER BY 2PM CT FOR SAME DAY SHIPPING
BEC Pro 20A 12S Switching Regulator
castle-creations
This is the CC BEC Pro High Output Switching Battery Eliminator Circuit (BEC) from Castle Creations....
MSRP:
$ 54.95
SAVINGS: 18%
ONLY
$ 44.95
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Wire - 36" 10 AWG White
castle-creations
This is the Castle Creations 36" section of 10 AWG Wire with White Insulation....
MSRP:
$ 12.95
SAVINGS: 23%
ONLY
$ 9.95
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 5 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
TQ Transmitter 2.4GHz Antenna
traxxas
This is the Traxxas Antenna TQ Transmitter 2.4GHz....
ONLY
$ 6.00
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Telemetry Expander Mount
traxxas
This is the Telemetry Expander Mount that fits the Traxxas XO-1, 1st generation E-Revo*, Summit*, all T-Maxx®/E-Maxx® trucks, Revo 3.3, Slayer Pro 4X4....
ONLY
$ 10.00
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Temperature & Voltage Telemetry Sensor
traxxas
This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1....
ONLY
$ 12.00
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 3 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
6" Standard Servo Extension Lead
spektrum
Spektrum servo extensions are built to exceed the needs of most normal use case scenarios for RC needs, whether it be in aircraft or surface applications. The standard build of these extensions are a great economical choice for most modelers, and are offered in four different lengths....
MSRP:
$ 6.89
SAVINGS: 20%
ONLY
$ 5.49
ORDER BY 2PM CT FOR SAME DAY SHIPPING
18" Heavy Duty Servo Extension
spektrum
18" Heavy Duty Servo Extension...
MSRP:
$ 9.19
SAVINGS: 24%
ONLY
$ 6.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
24" Heavy Duty Servo Extension
spektrum
24" Heavy Duty Servo Extension...
MSRP:
$ 10.39
SAVINGS: 18%
ONLY
$ 8.49
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Carbon Fiber Wire Gripper, 3 Wire / Sensor (2)
avid-rc
These wire grippers are used to organize your wires going from your speedo to your motor, including a flat sensor cable gripper for those that want to keep the battery from potentially breaking it....
ONLY
$ 5.00
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Mamba XLX 2 Receiver Harness w/ Switch
castle-creations
Castle Creations Mamba XLX 2 Receiver Harness. This is the factory replacement harness with switch, receiver and auxiliary connectors....
MSRP:
$ 10.95
SAVINGS: 18%
ONLY
$ 8.95
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Converter Cable for JST Port
hobbywing
Sensor wire adaptor for the Max G2 Series of sensor based ESCs. This adaptor, allows your Max G2 series ESC to work with standard sensor plugs on sensor based motors. This sensor adaptor does not support motor thermal protection. Do Not Use this Adaptor with the AXE R2 ESC or......
MSRP:
$ 7.00
SAVINGS: 29%
ONLY
$ 4.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Heavy Duty Dual Hub 6" Servo Extension
futaba
This is a Futaba J-Series Dual Heavy Duty Extension. This extension comes from the receiver and allows two servos to be connected for dual aileron servo applications. On one end of the wire is a male connector, the other end has two female connectors. The female connectors are molded together......
ONLY
$ 12.49
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 3 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Servo to LiPo Balance Port Connector, 2S
reef's-rc
2S LiPo Connector Battery Balance Port to JST...
MSRP:
$ 4.39
SAVINGS: 9%
ONLY
$ 3.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Servo to LiPo Balance Port Connector, 4S
reef's-rc
4S LiPo Connector Battery Balance Port to JST...
MSRP:
$ 4.39
SAVINGS: 9%
ONLY
$ 3.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 3 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Servo to LiPo Balance Port Connector, 3S
reef's-rc
3S LiPo Connector Battery Balance Port to JST...
MSRP:
$ 4.39
SAVINGS: 9%
ONLY
$ 3.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
XT90 Dual JST Connector w/ 2 Male-Male Adapters
reef's-rc
XT90 Dual JST Connector w/ 2 Male-Male Adaptors...
MSRP:
$ 10.99
SAVINGS: 9%
ONLY
$ 9.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Monster X Receiver Harness
castle-creations
This is a replacement Castle Creations Monster X Receiver Harness....
ONLY
$ 8.95
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
High Current Bullet Connector Set, 6.5mm
castle-creations
This is a set of six Castle Creations 6.5mm Bullet Connectors. The package contains 3 male and 3 female connectors. If you want something done right, you usually have to do it yourself. Castle Creations was never totally satisfied with the options for bullet connectors for high power applications, so......
MSRP:
$ 12.95
SAVINGS: 23%
ONLY
$ 9.95
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Pinion Gear, 32P, 22T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Blackened Steel 32 Pitch Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel .8 Mod Pinion Gear, 13T w/5mm Bore
robinson-racing
Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Pinion Gear, 32P, 13T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Blackened Steel 32 Pitch Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 2 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Pinion Gear, 32P, 15T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Blackened Steel 32 Pitch Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Only 1 left in stock — Order soon
ORDER BY 2PM CT FOR SAME DAY SHIPPING
Extra Hard Steel Pinion Gear, 32P, 16T w/ 5mm Bore
robinson-racing
Robinson Racing Extra Hard Blackened Steel 32 Pitch Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making......
MSRP:
$ 12.50
SAVINGS: 12%
ONLY
$ 10.99
ORDER BY 2PM CT FOR SAME DAY SHIPPING
